37
NO. SERVICE MENU DESCRIPTION SET PARAMETER NO.
9
OCCUPANCY
SENSOR
OCCUPANCY ON/OFF
Set occupancy delay
function valid or invalid.
OFF (default), ON
OCCUPANCY DELAY
Set the time for delayed
power-off of the
unattended IDU (valid only
when the IDU is connected
to an infrared sensing
controller).
0 minutes (default),15 minutes, 30 minutes, 60
minutes
OCCUPANCY SET TEMP OFFSET / 0ºF, 2ºF, 4ºF (default), 6ºF, 8ºF
10 Supplemental heat or Aux Heat status
Supplemental Heat or Aux
Heat status.
OFF (default), ON
Supplemental Heat or Aux
Heat status configuration.
1ºF (default), 2ºF, 3ºF, 4ºF, 5ºF
Time delay. 15 minutes (Default), 30 minutes, 45 minutes
Indoor fan status. ON (Default), OFF
To Next Page
Loading...
