Item
Operation flow and applicable data, etc.
Description
− 38 −
14. Hi-POWER
([Hi-POWER] button on the remote controller
is pressed)
When [Hi-POWER] button is pressed while the
indoor unit is in Auto, Cooling or Heating operation, Hi-
Mode
POWER mark is indicated on the display of the remote
controller and the unit operates as follows.
1. Automatic operation
• The indoor unit operates in according to the
current operation.
2. Cooling operation
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
• The preset temperature drops 1 degree
(The value of the preset temperature on the
3. Heating operation
remote controller does not change.)
The indoor unit's fan speed level increase 1 tap
• The preset temperature increases 2 degree
(The value of the preset temperature on the
4. The Hi-POWER mode can not be set in Dry
operation
FILE NO. SVM-10052
To Next Page
Loading...
