Carrier 42NQV050M - Operation of remote control

9-4. Remote Controller and Its Fuctions
9-4-1. Parts Name of Remote Controller
− 41 −
9-4-2. Operation of remote control
1. AUTOMATIC OPERATION
To automatically select cooling, heating, or fan only operation.
1. Press MODE : Select A.
2. Press : Set the desired temperature.
2. COOLING / HEATING / FAN ONLY OPERATION
To automatically select cooling, heating, or fan only operation.
1. Press MODE : Select Cool , Heat , or Fan only .
2. Press : Set the desired temperature.
Cooling: Min. 17°C, Heating : Max, 30°C, Fan Only: No temperature indication
3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or
HIGH .
• Infrared signal emitter
‚ Start/Stop button (
)
ƒ Mode select button ( )
„ Temperature button ( )
… Fan speed button ( )
† Swing louver button (
Set louver button (
ˆ On timer button ( )
ON
‰ Off timer button ( )
OFF
Š Sleep timer button ( )
Setup button ( )
Clear button ( )
Memory and Preset button ( )
High power button ( )
Economy button ( )
Filter reset button ( )
Clock Reset button ( )
Check button ( )
ON OFF
…
„
ƒ
ˆ
‡
†
•
‚
Š
Note: Some models, remote will have text above
the buttons.
14
15
12
‰
11
17
18
16
11
12
13
14
15
16
17
18
13
3. DRY OPERATION
For dehumidification, a moderate cooling performance is controlled automatically.
1. Press MODE : Select Dry .
2. Press MODE : Set the desired temperature.
‡
FILE NO. SVM-10052