10
3.5. Adjusting Heating
NOTE: If OFF is selected, the Heat, Cool, Auto and Fan Only will not be available. When
changing from the OFF mode to Heat, Cool, Auto, or Fan Only, it is normal for the system to
run the blower for a minute or two. During this time, the system is using the True Sense™
feature to determine the filter usage. This feature is part of the system design and cannot be
turned off.
• To adjust the heating temperature, enter the Main Screen by touching anywhere on the
Control.
• With the system in either AUTO or HEAT mode, use the Up (Y) and Down (B) buttons to
set the desired temperature.
• On the left hand side of the screen, the comfort profile will switch to manual, and the system
will be placed in a temporary hold.
• Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the desired
temperature in 15 minute increments.
• When the correct time interval is displayed, touch DONE.
• To return to the scheduled program, touch HOLD UNTIL, and then select PER
SCHEDULE.
3.6. Adjusting Cooling
• To adjust the cooling temperature, enter the Main Screen by touching anywhere on the
Control.
• With the system in either AUTO or COOL mode, use the Up (Y) and Down (B) buttons to
set the desired temperature.
• On the left hand side of the screen, the comfort profile will switch to manual, and the system
will be placed in a temporary hold.
• Use the Up (Y) and Down (B) buttons to change the time to temporarily hold the desired
temperature in 15 minute increments.
• When the correct time interval is displayed, touch DONE.
• To return to the scheduled program, touch HOLD UNTIL, and then select PER
SCHEDULE.
3.7. Adjust Temperature (Permanent Hold)
The Infinity System Control allows you to permanently override your programmed schedule by
adjusting the indoor temperature at any time to meet your needs.
3.8. Adjusting Comfort Activities (See Comfort Profiles on
page 14)
• To adjust the comfort activity, enter the Main Screen by touching anywhere on the Control.
To Next Page
Loading...
