Carrier A170203 - Uploading Schedules from PC;MAC

23
– Simply touch YES or NO to answer this question.
– If you select NO, the next question will ask what time you leave the home.
• Use the Up (Y) and Down (B) buttons to set the time you leave.
• After you have selected the correct time, touch NEXT to continue.
– You will then be asked what time you will return to your home.
• Use the Up (Y) and Down (B) buttons to set the time you return home.
• After you have selected the correct time, touch NEXT to continue.
5. If you select YES or have completed the previous steps, the next question will ask if you
want different sleep settings.
– If you select YES, the next question will ask what time you go to sleep.
• Use the Up (Y) and Down (B) buttons to set the time you go to sleep.
• After you have selected the correct time, touch NEXT to continue.
6. If you select NO or have completed the previous steps, you will be shown a screen that the
scheduling process is complete for the selected days and zones (if applicable).
– If you have completed the schedule, touch SAVE continue.
– If you touch CANCEL, it will prompt you back to step 5.
7. If you touched SAVE in step 6, you will be asked if you want to schedule more days.
– Simply touch YES or NO to answer this question.
– If you select YES, you will return to step 2 and follow the process.
8. If you select NO, the screen Control will show you the newly created schedule.
– If you have a zoning system, you will be asked if you want to schedule another zone.
• If you select YES, you will return to step 2 and follow the process.
• If you select NO, you will see the newly created schedule.
6.3. Upload My Schedule
As noted earlier, programming the control with the Carrier® Home mobile app is the most
convenient way. You can program a system that is not connected to the Internet using a PC or
MAC computer using the process shown, below.
The Upload My Schedule feature with the desktop app will allow you to upload your schedules
from a PC or MAC computer, load those schedules onto a micro SD card memory device, and
upload the schedules into the Infinity System Control.
NOTE: Use a 4GB to 32GB micro SD memory card. The card should be formatted for FAT32
(rather than FAT64 or exFAT) in order to be read by the control.
• To download the MyInfinity application for your computer, go to
www.MyInfinityTouch.com.
– Click on the Downloads tab.
– Download the MyInfinity Desktop application.