12
• Once you have selected the desired activity for ALL ZONES, you will have the option to
either permanently (HOLD) or temporarily (HOLD UNTIL) override your programmed
schedule.
A14239
– Selecting the HOLD option will permanently override your programmed schedule until
you CANCEL ALL ZONES.
– Selecting the HOLD UNTIL option will allow you to temporarily override your
programmed schedule.
– Once selected, use the Up (Y) and Down (B) buttons to change the time in 15 minute
increments.
– When the correct time interval is displayed, touch DONE.
3.11. Occupancy Override
The integrated motion sensor allows the system to make automatic set point and activity
changes, based on occupancy, to provide the optimum home comfort and energy savings.
To Next Page
Loading...
