13
A170203
The Occupancy Sensing feature can be enabled or disabled under the “sensors” icon on the main
screen. See Occupancy Setup section on page 48.
When the Occupancy Sensing feature is enabled, the current scheduled activity is HOME or
WAKE, and timing is “per schedule,” the activity and set point(s) change to AWAY
automatically when the space is determined to be Unoccupied.
When Occupancy Sensing feature is enabled, the current scheduled activity is AWAY, and
timing is “per schedule, “ the activity and set point(s) change to HOME automatically when the
space is determined to be Occupied.
“All zones HOME“ or “All zones AWAY” activity, and any HOLD or HOLD UNTIL setting
will override Occupancy sensing activity changes.
4. Features
4.1. Adjust Fan Speed
The Features function of Infinity System Control allows you to adjust the fan speed during
continuous fan operation.
• To adjust the fan speed, enter the Main Screen by touching anywhere on the Control.
• Touch FEATURES on the top left of the screen.
• A drop down menu will appear. Touch FAN selection.
• Use the Up (Y) and Down (B) buttons to set the fan to AUTO, LOW, MEDIUM or HIGH,
then touch SAVE. This will permanently change the fan setting in the active Comfort Profile.
If the current activity is Manual, it will only change the current fan speed.
To Next Page
Loading...
