17
A14244
– Once your Humidifier is turned ON, use the Up (Y) and Down (B) buttons to set the
desired humidity level between 5-45%.
– Press SAVE when finished, or CANCEL to discard any changes.
• Next, select your desired humidity level during cooling by touching COOLING
HUMIDITY.
A14245
– Use the Up (Y) and Down (B) buttons to set the desired dehumidification level between
46-58%.
– Touch YES or NO for the system to over-cool the conditioned space by up to 3ºF to
remove as much humidity out of the air as possible. The system will not over-cool past
70°F.
– Press SAVE when finished, or CANCEL to discard any changes.
To Next Page
Loading...
