Carrier AquaSnap 30AWH-R - Page 11

9
Herearethestepstochangetheairsetpointcontrol:
j While in standby mode or operating in cooling/heating mode:
i. First press the “up” or “down” button to change the air setpoint;
  ii.Next,presstheconrmbuttonorwaitfor5swithoutpressinganybuttontochangetheDHWtemperaturesetting.
Next, press the “up” or “down” button to change the DHW.
k While operating in DHW mode:
i. First press the “up” or “down” button to change the temperature of DHW;
ii.Presstheconrmbuttonorwaitfor5swithoutpressinganybuttontoenterthesettingvalueofLWT.Next,press
the “up” or “down” button to change the air setpoint.
English
2. User operation