Carrier CCU - Timer Programming Functions; Fault Level Configuration; Communication Settings; Access Level Management

3 - MENU TREE
5 Timer programming
ENTER
5.1 Ventilation on
5.2 Setpoint shift
20 programming steps to
switch the fan on
20 timer programming steps to
shift setpoint
0
Back to menu
6 Fault level
ENTER
N01
N19
Selection for forwarding faults to the
critical or non-critical fault relays
0
Back to menu
7 Communication
ENTER
P700
P706
Communication conguration
0
Back to menu
8 Access level
ENTER
8.1 Level 1 access
8.2 Level 2 access
8.3 Level 3 access
To change the access level
0
Back to menu
9 Humidier
ENTER
9.1 Settings
9.2 Reading parameters
9.3 Alarms
P900
P912
P950
P958
Humidier
conguration
0
Back to menu
11