LENGTH WIDTH DEPTH A B C D TOTAL K L M
50TJM - 18 192 178 236 254 860
50TJM - 24 197 182 241 260 880
6. Dimensions are from outside of corner post. Allow 8mm on each side for top cover drip edge.
UNIT DIMENSIONAL DRAWING: 50TJM - 18 and 50TJM - 24 (Fig - 1)
7. Weights are Given for aluminim evaporator and condenser coil plate fins
5. With the exception of clearance for the condenser coil and the damper / power exhaust as stated in Note no. 6, a removal fence or barricade requires no clearance.
TOP: 1829mm to assure proper condenser fan operation.
SIDE: 1219mm for Compressor, Filter and Control boxes access.
- Local codes or jurisdiction may prevail.
REAR: 2134mm for coil removal. This dimension can be reduced to 1219mm if conditions permit coil removal from the top.
1. Dimensions are in millimeters.
To Next Page
Loading...
