LENGTH WIDTH DEPTH A B C D TOTAL K L M
50TJM - 28 248 226 310 340 1125
50TJM - 34 254 231 317 348 1150
NOTES:
6. Dimensions are from outside of corner post. Allow 8mm on each side for top cover drip edge.
7. Weights are Given for aluminim evaporator and condenser coil plate fins
REAR: 2134mm for coil removal. This dimension can be reduced to 1219mm if conditions permit coil removal from the top.
TOP: 1829mm to assure proper condenser fan operation.
SIDE: 1219mm for Compressor, Filter and Control boxes access.
- Local codes or jurisdiction may prevail.
5. With the exception of clearance for the condenser coil and the damper / power exhaust as stated in Note no. 6, a removal fence or barricade requires no clearance.
UNIT DIMENSIONAL DRAWING: 50TJM - 28 and 50TJM - 34 (Fig - 2)
1. Dimensions are in millimeters.
To Next Page
Loading...
