Carrier i-Vu XT

To Next Page

To Previous Page

The i-Vu® XT Router must be mounted in a metal enclosure or cabinet which is properly rated for the location

where it is being installed.

NOTE We recommend screw mounting when installing in a high temperature and high humidity environment.

DIN rail mount

1 Push down and pull out the center tabs shown below to clear the din rail trough on the back of the router.

2 Place the router on the DIN rail so that the rail is in the trough on the back of the router.

3 Push the center tabs towards the router until you hear them click.

4 Pull gently on the router to verify that it is locked in place.

To mount the i-Vu® XT Router

Carrier i-Vu XT - Page 9