22
NOTE: This option may not be available with the ERVXXNVA ventilator due to
its simplified Control design.
d The AUTO setting will allow the user to choose the maximum fresh
air that the ventilator will provide. Selections are Low, Medium or
High.
d The MANUAL setting allows you to select the percentage of fresh
air to supply to your home.
d Use the Up (Y) and Down (B) buttons to set the desired ventilation
level.
d Press SAVE when finished, or CANCEL to discard any changes.
S If applicable, select the amount of fresh air to circulate during cooling
mode by touching COOLING FRESH AIR. Again, you will have the
option of choosing among AUTO, MANUAL and OFF.
d Use the Up (Y) and Down (B) buttons to set the desired ventilation
level.
d Press SAVE when finished, or CANCEL to discard any changes.
To Next Page
Loading...
