56
S The Control will inform you if the connection is successful. If so, touch
DONE.
d If the connection is unsuccessful, verify that the proper information
has been entered before you touch RETRY. The Control will go
through the process again.
A13238
S After the Control has connected to the network, go to
www.MyInfinityTouch.com to register the unit and begin remote access.
This requires the MAC address and serial number of the Infinity System
Control. To find the serial number and MAC address of the Infinity
System Control, click on Menu, Down Arrow, Wireless and View MyIn-
finity Registration Info. This screen will provide the information needed
on the MyInfinity website during registration.
To Next Page
Loading...
