3
S Pressing on the Connectivity Status bars from the Home Screen will
allow you to view the Remote Access Status screen.
A13260C
S NOTE: If the Infinity System Control is not connected to the home
network, a red “X” will appear over the strength bars. If the Infinity
System Control is connected to the home Wi--Fi network but loses con-
nection to the MyInfinity Server, a triangle will appear over the strength
bars as depicted in the image below. Connection strength to the home
Wi--Fi network will continue to be displayed by the number of solid
bars. If this problem persists, please contact 1--800--Carrier for assis-
tance.
A170247
To Next Page
Loading...
