38
30GXN,R204-350 AND ASSOCIATED MODULAR UNITS
UNIT
30GXN,R
SHIPPING WEIGHT
WITHOUT PACKAGING
SHIPPING WEIGHT
WITH PACKAGING
LIFTING HOLES CENTER OF GRAVITY
ABCDE
lb kg lb kg in. mm in. mm in. mm in. mm in. mm
204 12,426 5636 13,426
6 090
57.8 1467 40.3 1024 67.7 1720 114.6 2910 34.6 879
204
13,826 6271 14,826
6 725
57.8 1467 40.3 1024 67.7 1720 114.6 2910 34.6 879
208 13,778 6250 14,778
6 703
71.8 1824 56.7 1440 80.0 2032 164.8 4186 35.3 897
208
15,553 7055 16,553
7 508
71.8 1824 56.7 1440 80.0 2032 164.8 4186 35.3 897
225, 370A,
450A/B, 475B
12,626 5727 13,626
6 181
57.8 1467 40.3 1024 67.7 1720 114.6 2910 34.6 879
225, 370A,
450A/B, 475B
14,001 6351 15,001
6 804
57.8 1467 40.3 1024 67.7 1720 114.6 2910 34.6 879
228,
453A/B, 478B
13,793 6256 14,793
6 710
71.8 1824 56.7 1440 80.0 2032 164.8 4186 35.3 897
228,
453A/B, 478B
15,568 7062 16,568
7 515
71.8 1824 56.7 1440 80.0 2032 164.8 4186 35.3 897
249,
475A, 500A/B
13,474 6112 14,474
6 565
60.5 1537 40.3 1024 87.4 2219 121.6 3088 34.7 882
249,
475A, 500A/B
15,174 6883 16,174
7 336
60.5 1537 40.3 1024 87.4 2219 1216 3088 34.7 882
253, 373A,
393A, 478A,
503A/B
16,415 7446 17,415
7 899
81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
253, 373A,
393A, 478A,
503A/B
19,620 8899 20,620
9 353
81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
264, 390A,
415A, 525A/B
13,509 6128 14,509
6 581
60.5 1537 40.3 1024 87.4 2219 121.6 3088 34.7 882
264, 390A,
415A, 525A/B
15,209 6899 16,209
7 352
60.5 1537 40.3 1024 87.4 2219 121.6 3088 34.7 882
268,
418A, 528A/B
16,430 7453 17,430
7 906
81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
268,
418A, 528A/B
19,635 8906 20,635
9 360
81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
281 18,250 8278 19,250
8 732
81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
281
21,455 9732 22,455 10 185 81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
301 18,270 8287 19,270
8 741
81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
301
21,475 9741 22,475 10 194 81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
325 18,310 8305 19,310 8 759 81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
325
21,515 9759 22,515 10 213 81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
350 18,360 8328 19,360 8 782 81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
350
21,565 9782 22,565 10 235 81.7 2075 62.5 1588 80.9 2055 174.4 4430 34.1 866
LEGEND
— Unit with Optional Copper-Fin Coils
NOTES:
1. Rig with eight cables. Spread with four 95 in. [2413 mm] and two A + B + C long
suitable spreader bars.
2. Run the rigging cables to a central suspension point. Rigging point to be a mini-
mum of 156 in. [3962 mm] above top of unit.
3. If overhead rigging is not available, the unit can be moved on rollers or dragged.
When unit is moved on rollers, the unit skid, if equipped, must be removed. To lift
the unit, use jacks at the rigging points. Use a minimum of one roller every 3 ft
[915 mm] to distribute the load. If the unit is to be dragged, lift the unit as
described above, and place unit on a pad. Apply moving force to the pad, not the
unit. When in its final location, raise the unit and remove the pad.
4. Check bill of lading for shipping weight of unit.
5. Center of gravity for lifting purposes only.
All panels must be in place when rigging unit. Do not attempt to forklift
unit if no skid is supplied.
Fig. 28 — Rigging Information (cont)