Carrier RG67V/BGEF - Freeze Protection (F.P.); Lock Modes Activation; Silence Function

09
4. HOW TO USE ADVANCED FUNCTIONS
F. P.
Press this button 2 times during one second under HEAT Mode and setting temperature of 16 °C/60° F.
2
The unit will operate at high fan
speed (while compressor on) with
temperature automatically set to
8 °C/46 °F.
Note:This function is for heat pump air conditioner only.
Press this button 2 times under HEAT Mode and setting temperature of 16 °C/60° F to activate the freeze protection
function. It will help to keep the room above 0 °C/32 °F(freezing point) in severe cold winter. Press On/Off, Sleep,
Mode, Fan and Temp. button while operating will cancel this function.
Lock
Mode 1
Press together button and button at the same time more than 2 seconds to activate Lock Mode 1 function.
2s
Swing
2s
Fix
Lock symbol displays
Enter lock mode 1 by pressing and button at the same time more than 2 seconds. At lock mode 1, all
buttons will not response except press these two buttons again to disable locking.
Lock
Mode 2
Press together TIMER button and X-ECO button at the same time more than 2 seconds to activate lock mode 2
function.
2s
Timer
2s
X-ECO
Lock symbol displays
Enter lock mode 2 by pressing TIMER and X-ECO button at the same time more than 2 seconds. At lock mode 2, all
buttons will not response except press ON/OFF, TEMP UP and DOWN buttons or press these two buttons again to
disable locking.
Silence
Keep pressing Fan button for more than 2 seconds to activate/disable Silence function.
Fan
2s
Due to low frequency operation of compressor, it may result in insufcient cooling and heating capacity. Press ON/
OFF, Mode, Sleep button, turn on F.P.or Self clean function while operating will cancel silence function.(Model
dependent)