5 62-12002
4. Pre-Trip Inspection (continued)
6. General Unit: Visually inspect the entire unit for leaks, loose bolts,
frayed, loose, or broken wires, etc. The radiator and condenser
coils of the unit must be free of dirt, bugs, cardboard, or any other
debris that may obstruct airflow across the coils. The evaporator
(located inside the body) must also be free of debris, especially
stretch-wrap, which is often used during transport to prevent cargo
shifting.
7. Truck Body: Inspect the truck body prior to loading. Check the
door and vent seals for damage and wear. Inspect the entire
interior and exterior of the body for damage, and check for damage
to the inner and outer skins of the body. Damage to the insulation
may compromise the unit’s ability to maintain the product
temperature by increasing the amount of heat gain across the truck
body.
To Next Page
Loading...
