62-12002 22
13. Unit Data
The Unit Data key is used to display the unit operating data. This key, in
conjunction with the Arrow keys and = (Enter) key, will allow the user to
display the unit's operating data values (hour meters, battery voltage,
etc.). Once inside the Unit Data submenus,
if no keys are pressed for five
seconds the display will return to the default display.
For all temperature unit data, the values are in °C or °F
depending on the configuration and the °C or °F indicator will
be displayed appropriately. Pressures are displayed with a P
or B to signify psig or bars.
1. Pressing the Unit Data key will bring up the Unit Data submenu. Use
the up and down arrow keys to cycle through the submenu items.
The submenus are: SENSORS, METERS, SYSTEM,
ENGINE, INFO.
2. When a submenu item is displayed, press the = (Enter) key to
enter that submenu and then use the Arrow keys to cycle through
the items.
To Next Page
Loading...
