37 62-12002
Stop the engine. Lock out tag out.
Check fuel pump filter, clean if
necessary, replace bowl gasket
OO
Check oil level and refill if required.
Check for oil leak
O
Drain and refill oil O O
Replace oil filter and bypass filters,
fuel filter, air filter
OO
Check air filter element. Replace if
necessary
O
Check all belts (wear + tension) O O O
Check clutch and connections,
pulleys, standby motor, alternator,
(noise test). Hand test
O
Replace all belts O
Check operation of evaporator fan
/ turbine (bearing/noise)
OO
Check evaporator fan brushes -
Clean if necessary (if applicable)
O
Check high and low voltage wiring,
and connections into control box,
corrosion, chafing and signs of
heat build up
OO O O
Visually check cleanliness of
condenser and clean if necessary
OO O O
Visually check cleanliness of
evaporator and clean if necessary
OO O O
Check air switch calibration O
Check alternator brushes O O
Check and lubricate all linkages,
hinges and lock mechanisms
O
Grease serviceable bearings O
Maintenance Schedule (Continued)
Initial Check
Up
Service
A
Service
B
To Next Page
Loading...
