21
Click on the PED link to get access to the list of documents 
on PED conformity.
A new web page is displayed with the index of available 
documents.
Click on the IOM link to get access to the list of user manuals.
Click on the Misc link to get access to other technical 
documents (dimensional drawings, wiring diagrams).
7.1 - General
The Touch Pilot control system has many fault tracing aid 
functions. The local interface and its various menus give access 
to all unit operating conditions. If an operating fault is detected, 
an alarm is activated and an alarm code is stored in the Alarms 
menu, sub-menus “Reset alarms” and “Current alarm”.
The alarm icon on the interface (see chapter 4) allows the 
quick display of the unit status.
•  A ashing LED shows that the circuit is operating but 
there is an alert.
•  A steady LED shows that the circuit has been shut 
down due to a fault.
The “Reset alarms” menu on the main interface displays up 
to ve fault codes that are active on the unit.
7.3 - Resetting alarms
When the cause of the alarm has been corrected the alarm 
can be reset, depending on the type, either automatically on 
return to normal, or manually when action has been taken 
on the unit. Alarms can be reset even if the unit is running.
This means that an alarm can be reset without stopping the 
machine. In the event of a power supply interrupt, the unit 
restarts automatically without the need for an external 
command. However, any faults active when the supply is 
interrupted are saved and may in certain cases prevent a 
circuit or a unit from restarting.
A manual reset must be run from the touch screen interface 
or the web via the “Reset alarms” menu, item RST_ALM. 
Alarm reset can be protected by a basic user level password.
7.4 - Critical alarms
Certain alarms linked to the frequency variator are considered 
as critical (see chapter 7.5.2 - Variator alarm sub-codes).
These alarms can only be cancelled if the user is connected 
as an advanced user. If an alarm of this type is triggered, 
contact Carrier Service.