Carrier Touch Pilot 30XW-V - Interface Screen Structure and Menu Item Details

10
Home Synoptic
Menu accessible without password
Menu accessible with user password
4.11 - Screen structure

icon   Associated table
General parameters General parameters GENUNIT
Temperatures Temperatures TEMP
Pressures Pressures PRESSURE
Input status Input status INPUTS
Output status Output status OUTPUTS
Pump status Pump status PUMPSTAT
Run times Run times RUNTIME
Modes Modes MODES
Setpoint table Setpoint table SETPOINT
Con guration Menu Con guration Menu CONFIG
* Depends on selected language, default is English

No. Status  Unit  
1 0 to 2 - - Local = 0. Net = 1.
Remote = 2
Local = 0, Network = 1,
Remote = 2
2 - - - Run status Run status
3 disable/
enable
disable - Net: Cmd start/stop Unit start/stop via CCN or
BACnet/IP (option)
4 yes/no no - Net: Cmd occupied Unit time schedule via
CCN or BACnet/IP (option)
5 - - min Minutes left for start Delay before start-up
6 - - - Heat/cool status Heat/cool status
7 0 to 2 - - Heat/cool select Heating/cooling selection
via CCN or BACnet/IP
(option)
8 - - - 0 = Cool. 1 = Heat.
2 = Auto
0 = Cool. 1 = Heat.
2 = Auto
9 0 to 2 - - Setpoint select Setpoint selection via
CCN or BACnet/IP (option)
10 0 = Auto. 1 = Spt1.
2 = Spt2
0 = Auto.1 = Setpoint 1.
2 = Setpoint 2
11 yes/no yes - Setpoint occupied? Occupancy setpoint
12 - - % Percent total capacity Total unit capacity
13 - - °C Current setpoint Current setpoint
14 -20.0 to 67.2 - °C Control point Control point
15 - - A Actual chiller current Total unit current
16 0 to 2000 - A Chiller current limit Unit current limit
17 disable/
enable
disable - Emergency stop CCN or BACnet/IP (option)
emergency stop
18 0 to 100 0 % Active demand limit
val
Demand limit value from
the CCN or BACnet/IP
network
General parameters
Main menu Log in/Log out screen Con rm stop
Choose operating mode
Alarm menu
Setpoint table
Reset alarms
Con guration menu
Legend
Main menu
Alarm menu
Con guration menu
Current alarms
Alarm history
Critical alarm history
Temperatures
Output status
Modes
Pressures
Pump status
Run Times
Input status
Reset con guration
General con guration
Broadcast menu
Control Identi cation
User con guration
Holiday menu
Date/time con guration
Pump con guration
Schedule menu