15
2.3 Time setting
The time setting interface can set the time and date, and the initial setting needs to set "date" and "time",
using the 24-hour system.
Slide to set the current time, select the time and click "OK" to enter the next step. Click “Back” to discard the
current Settings and return to the previous action.
2.4 Password setting
Set the initial password. The default account is "Administrator", which is the highest authority account and
has all the authority of the controller. Please set the password carefully and save it properly.
Set the password and enter it here for confirmation. When the password is inconsistent, a prompt will pop up.
When the password is consistent, jump to the next step
To Next Page
Loading...
