80
3.25 DST（Daylight saving time）
Daylight saving time is used for special regional daylight saving time. Setting daylight saving time does not
affect the display of local time. It is mainly used for adjusting the trigger time of schedule setting.When the
daylight saving time is set to 60 minutes, the timed action trigger time is -60 minutes
① Daylight saving time switch, click to switch daylight saving time switch
② Daylight saving time, point solution set daylight saving time starting and ending time
③ Compensation time, click the input daylight saving time adjustment time, adjustment unit is minutes
④ Cancel button, click to cancel the current change, abandon the operation and exit the current interface
⑤ Ok button, click OK to save the current changes, and exit the current interface
①
②
③
④
⑤
To Next Page
Loading...
