47
3.9.1 Add a map
The current function only supports adding a map to the floor. After selecting the floor, click "Change the
Map" to add a map
① On the navigation bar, click toggle or view the floor
② Equipment list in the floor, showing the number of equipment that has not been dragged to the map in
the current floor.Click the device on the device side, select the device to be dragged from the drop-down
menu, and click and drag it to the corresponding position
③ Change map/save button, click "Change map" to select the image import under the root directory of U
disk, click "Save" to save the changes to the host after editing.
④ Add map button, if the current floor has not been added to the map, you can click in this interface to add
directly.
①
②
④
③
To Next Page
Loading...
