57
3.13.1 Cyclic timing task setup
The cyclic timing task is used in a fixed setting scenario where the device is on and off
① Timed task view, click to check the set task
② Timed task name, click to edit
③ Timed action screening, can choose "all/internal machine/full heat exchanger/new fan", convenient for
management
④ Sort button, click toggle sort, sort by name or sort by time
⑤ Add and delete button, click toggle add and delete
Click "-" to start deletion, click "selected/unselected" to switch the state, after selecting, click to complete
deletion of selected items, and click "Cancel" to give up the operation
⑥ To enable/disable the timer action button, click toggle the enable/disable status of all timer
actions.Enabling means that the current timed action takes effect, and when the trigger condition of the
timed action is satisfied, the control instruction is issued.Deactivation means that no timing condition is
issued regardless of whether the trigger condition is met.
⑦ Timer action bar, view the current timer action, click to edit
⑧
⑦
①
② ③
④ ⑤
⑥
To Next Page
Loading...
