71
⑤ Device tiles, click the operation Settings switch, double click to see the current linkage details
3.16.2 Linkage function setting
Click edit linkage Settings
① Linkage switch, click to switch linkage to set the switching state
② Equipment linkage, click to set the associated indoor machine range
③ Boot setting, whether the current device starts up synchronously
④ Click to set the conditions for linkage startup, and choose "All internal machine on"/" all internal organs
"/" Any internal machine on"
⑤ Shutdown linkage, set whether the current device linkage shutdown
⑥ Cancel button, click cancel, abandon the current operation
⑦ Ok button, click OK to save the current configuration
①
②
③
④
⑤
⑥ ⑦
To Next Page
Loading...
