Carrier ZS Pro-F - ZS Plus Sensor; To make the zone warmer or cooler

ZS Sensors
Carrier Sensors CARRIER CORPORATION ©2021
Installation Guide All rights reserved
3
ZS Sensors are thermistor-based temperature sensors that may optionally sense humidity, CO2, or VOC. ZS
Sensors are wired to the Rnet on i-Vu® Open controllers:
The following table shows the 4 ZS Sensor models and their features.
Part # with
Carrier logo
Part # wihout
logo
Sensor
Features
ZS-CAR
ZS-C-CAR
ZS-H-CAR
ZS-V-CAR
ZS-HC-CAR
ZS-HV-CAR
ZS-BNK
ZS-C-BNK
ZS-H-BNK
ZS-V-BNK
ZS-HC-BNK
ZS-HV-BNK
ZS Standard
• Local access port
• No user control
ZSPL-CAR
ZSPL-C-CAR
ZSPL-H-CAR
ZSPL-V-CAR
ZSPL-HC-CAR
ZSPL-HV-CAR
ZSPL-BNK
ZSPL-C-BNK
ZSPL-H-BNK
ZSPL-V-BNK
ZSPL-HC-BNK
ZSPL-HV-BNK
ZS Plus
• Slide potentiometer to make the zone
warmer or cooler
• button to override the schedule and
put the zone in an occupied state, or
force the zone to an unoccupied state
• Green LED to indicate occupied state
• Local access port
ZS Sensors
Downloaded from ManualsNet.com search engine