Carrier ZS Standard - Energy Saving Mode Icon; Alarm Icon

Icons and text indicators
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
17
Energy saving mode icon
1 From the
Sys Out
microblock menu, add a
BACnet Binary Value Status
microblock.
2 On the Property Editor's
Rnet
tab, check
Enable Rnet
.
3 Select
Energy Saving Mode (116)
from the
Rnet Tag
drop-down list.
In the example below, will display on the Home screen when in the Energy Saving mode.
Alarm icon
1 From the
Sys Out
microblock menu, add a
BACnet Binary Value Status
microblock.
2 On the Property Editor's
Rnet
tab, check
Enable Rnet
.
3 Select a pre-defined alarm (1XXX) from the
Rnet Tag
drop-down list.