Carrier ZS Standard - Appendix B: ZS Pro and Pro-F Sensor Screen Fields

Appendix B: ZS Pro and Pro-F Sensor screen fields
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
37
Primary Value Field
The primary value field displays numeric values that are exposed to the ZS sensors or displays text for binary or
multi-state value objects.
Numeric values
- This field can display:
• A negative symbol
• Up to 2 decimal places defined by the
Display Resolution
field in an ASVI or AV microblock. If the resolution is
0.5, a small .5 appears as shown above. Any other resolution that shows a decimal uses the decimals
between the large numbers in the Primary Value field.
• Up to 4 significant digits. The maximum value that can be displayed is 1999.5. If the value to be displayed
exceeds the maximum value, the primary value field will flash the maximum value to indicate the value is
outside of range.
Display text
- 3 alpha characters can be displayed on the screen in the 888 position of the Primary Value field
shown above. Display text can be up to 8 characters, but anything over 3 characters will scroll. The letters K, M, Q,
W, X do not display on a screen.
Effective Setpoints Fields
These fields display the effective setpoint values. They can display a maximum value of 99 or 99.5 if the
Edit
Increment
is set to 0.5. If the effective setpoint exceeds this maximum value or if the
Edit Increment
is set to 0.1,
the value will flash.
TIP
If you need an Edit Increment of 0.1, put the effective setpoints on the Information screen in the Primary
Value field. Hide the effective setpoints on the Home screen by selecting
Sensor Setpoint Adjust Option 4
on the
BACnet Setpoint
microblock's
Rnet
tab.
Rnet Tag Field
The Rnet tag field displays a text indicator (such as
OCC
) or an Rnet tag number (up to 1999) that defines what is
being displayed in the Primary Value field. See:
Icons and text indicators (page
15)
Appendix A: Rnet tags (page 32)
Appendix B: ZS Pro and Pro-F Sensor screen fields