To use values from individual sensors in your control program
ZS Sensor CARRIER CORPORATION ©2020
Applications Guide All rights reserved
31
4 Select the controller on i-Vu's navigation tree.
5 Go to the
page >
tab and expand
>
. Ctrl+click
on the ZS property name to open the ASVI popup.
6 In the popup, on the
page >
tab, scroll down to the
section to get
the
.
7 On the zone's
page >
tab, enter the Object Name in the ANI's address. For this
example, the address would be:
bacnet://this/zone_temp_1/4173(3)
Example program:
To Next Page
Loading...
