CAS CI-200A User Manual



CAS CI-200A Specifications

General

Category	Accessories
Model	CI-200A
Display	LCD
Resolution	1/30, 000
Power	2 AA batteries
Measurement Range	0.0 to 99.9 SPAD
Accuracy	±1.0 SPAD
Power Source	2 AA batteries

Summary

1. Features

1-2. Major Functions

Key operational functionalities and primary uses of the indicator.

2. Specifications in Appearance

2-2. Front Panel Descriptions

Detailed explanation of the controls and indicators on the front panel.

3. How to Install

3-1. How to Connect Load Cell

Guide on connecting the load cell to the indicator.

4. Weight Setup (Calibration) Mode

4-1. Weight Setup Menu (CAL1 – CAL9)

Overview of the calibration menu options and procedures.

5. Set Mode

5-1. How to Enter the Set Mode

5-3. Set Menu Descriptions (F00 ~ F99)

Detailed descriptions of all configurable functions (F00-F99).

6. Test Mode

6-1. How to Enter the Test Mode

Steps to access the diagnostic test functions of the indicator.

6-2. Test Menu (TEST 1 - TEST10)

8. General Function Descriptions

8-4. How to Enter High Limit (LCD, SC Only)

Steps to set the upper limit for weighing checks.

8-5. How to Enter Low Limit (LCD, SC Only)

Steps to set the lower limit for weighing checks.

11. RS-232C Interface in Detail

11-1. RS-232C Port Connection

11-3. RS-232 Communication Protocol

Details on data formats and communication protocols for RS-232.

12. Error Message

12-1. Error Message from the Weight Setup Mode

Troubleshooting guide for errors encountered during weight setup.

12-2. Error Message from the Weighing Mode

Troubleshooting guide for errors encountered during weighing.