CAS CI-201A User Manual



CAS CI-201A Specifications

General

Brand	CAS
Model	CI-201A
Category	Accessories
Language	English

Summary

Safety Cautions

Warning and Attention Definitions

Safety Warnings and Precautions

Electrical and Fire Safety

Covers power, grounding, cord care, and fire prevention measures.

Operational Environment and Handling

1. Features

1-2. Major Functions

1-3. Analog and A/D Conversion Specs

1-5. General Specifications

2. Specifications in Appearance

2-2. Front Panel Descriptions

Main Display and Status Indicators

CI-200S/SC Front Panel Details

Keyboard Functions Overview

Details the functionality of various keyboard keys.

2-3. Rear Panel Descriptions

CI-200S/SC Rear Panel Details

3. How to Install

3-1. Load Cell Connection

Guides on connecting the load cell to the indicator.

4. Weight Setup Mode

Weight Setup Definition

Accessing Weight Setup Mode

Weight Setup Menu (CAL1-CAL9)

Lists available calibration parameters and their order.

CAL 1: Maximum Value Setting

Details setting the maximum weighing value.

CAL 2: Division and Decimal Setting

Explains setting minimum division and decimal position.

CAL 3-1: Multi Calibration Step

CAL 3-2: Zero Calibration

Guides through the zero calibration process.

CAL 3-3: Setting Calibration Weight

Explains how to set the calibration weight.

CAL 3-4: Weight Calibration

Details the weight calibration (span adjustment) process.

CAL 8: Zero Adjustment

Guides on zero adjustment for zeroing errors.

4-2. Indicator Sealing Procedure

Instructions on sealing the indicator after calibration.

5. Set Mode

5-1. Entering the Set Mode

5-2. Key Operations in Set Mode

5-3. Set Menu Descriptions (F00-F99)

Lists and describes various parameters available in the Set Mode.

RS-232 Communication Settings

Details RS-232 communication settings.

RS-232 Device ID & Parity

Details RS-232 device ID and parity bit settings.

COM1 Communication Settings

Details COM1 baud rate and usage settings.

COM1 Output Format & Mode

Details COM1 output format and mode settings.

COM2 Communication Settings

Details COM2 baud rate and usage settings.

COM2 Output Format & Mode

Details COM2 output format and mode settings.

Print Function Settings

Details printer selection and print format settings.

F40: Printer Selection

Details printer selection settings.

F41: Print Format

Details print format settings.

6. Test Mode

6-1. Entering Test Mode

Explains the procedure to access the test mode.

6-2. Test Menu (TEST 1-10)

Lists the various tests available in the test mode.

Test 1: Key Test

Details the key test function.

Test 2: Display Test

Details the display screen test function.

Test 3: Load Cell & A/D Test

Details the load cell and A/D conversion test.

Test 4: Serial Communication Test

Details the serial communication test.

TEST 5: Printer Test

Details the printer test function.

TEST 8: EEPROM Test

Details the EEPROM test function.

Test 9: Battery Test

Details the battery test function.

Test 10: RTC Test

Details the RTC test function.

7. System Mode

7-1. Entering System Mode

7-2. PCS Mode Overview

7-2-1. PCS Sample Input Method

Details sample input method for PCS mode.

7-2-2. PCS Direct Input Method

Details direct input method for PCS mode.

7-3. PERCENT Mode Overview

7-3-1. Percent Sample Input Method

Details sample input method for percent mode.

7-3-2. Percent Direct Input Method

Details direct input method for percent mode.

8. General Function Descriptions

8-4. Setting High Limit

Details how to set the high limit value.

8-5. Setting Low Limit

9. Weighing Mode

9-1. Zeroing Function (LED)

9-2. Tare Function (LED)

9-3. Hold Function (LED)

9-4. Zeroing Function (LCD)

9-5. Tare Function (LCD)

9-6. Hold Function (LCD)

11. RS-232C Interface

11-1. RS-232C Port Connection

11-2. Connecting Serial Devices

11-3. RS-232 Communication Protocol

11-3-1. 22 Bytes for CAS

11-3-2. 10 Bytes for CAS

11-3-3. 18 Bytes for AND

12. Error Message

12-1. Weight Setup Errors

12-2. Weighing Mode Errors