CAS CI-201A - 9. Weighing Mode; 9-1. Zeroing Function (LED); 9-2. Tare Function (LED)

9. Weighing Mode
9-1. Zeroing Function (used when the zero point changes) - LED

Range of zero point: within a range set in F13





@  @D)

9-2. Tare Function (used for weighing with a container) - LED

Maximum tare set range: maximum weight
KJ$$





 
;J/)&=
& 
;>=
 !
;"J,)&=

If you want to know the total weight;





K&; !L=

If you want to know the net weight;





K&; !=
8 !

If the tare is removed;

8 !&;=
;=
