Need help?Do you have a question about the CAS CI-150A and is the answer not in the manual?
General| Brand | CAS |
|---|---|
| Model | CI-150A |
| Category | Accessories |
| Language | English |
Details the various features and functions of the CI-150A series weighing indicator.
Details the function and usage of each key on the front panel of the indicator.
Explains the pin assignments and wire colors for connecting the load cell.
Instructions on how to access the test modes of the weighing indicator.
Describes the keys used for navigating and operating within the test menus.
Lists the available test functions from TEST 1 to TEST 8.
Explains the serial communication (RS-232, RS-485) test with a computer.
Describes the printer test procedure to ensure proper printing functionality.
Instructions on how to access the calibration modes of the weighing indicator.
Lists the available calibration functions from CAL 1 to CAL 9.
Sets the unit of measurement (kg or ton) for calibration.
Configures the maximum weight value allowed for the scale.
Sets the minimum division and decimal position for accurate readings.
Performs zero calibration by ensuring the load cell is at zero.
Executes the span calibration using predefined weights.
Allows direct input of zero and span values for load cell calibration.
Performs zero adjustment when zeroing errors occur.
Adjusts calibration based on local gravity for accuracy.
Instructions on how to access the set mode for configuration.
Describes the keys used for navigating and modifying settings.
Lists various settings categories including General, Communication, and Print.
Details settings for AD speed, filters, key lock, and operating conditions.
Configures communication parameters for serial ports (COM1, COM2).
Configures settings related to printing functions and forms.
Allows setting the internal clock date and time.
Configures voltage and current output ranges and zero/span.
Configures the operating mode for the relay outputs.
Instructions on how to enter the weighing mode.
Explains the function of each key during weighing operations.
Provides practical examples of using the indicator's weighing functions.
Illustrates how to use the tare function for weighing containers.
Shows how to switch and display between Net and Gross weight.
Demonstrates how to print weighing data from the indicator.
Diagram and explanation of the RS232 communication port pinout.
Diagram and explanation of the RS485 communication port pinout.
Lists errors encountered during weight calibration and their solutions.
Lists errors encountered during weighing operations and their solutions.
To Next Page
