CAS CI-150A - Set Mode Configuration; How to Enter Set Mode; Available Keys in Set Mode

25
SET MODE
(1) How to Enter
Turn on the power while pressing the "TARE" key on the front of the indicator.
(2) Available Keys
Used to save inputted value and exit to menu selection.
Used to set the current value to zero.
Used to set the current value ×10.
Used to set the current value +1.
Used to set the current value -1.
(3) Set Value Conversion Menu
Classification Menu SubMenu
GEN.01 Set AD speed
GEN.02 Set average Filter Buffer
GEN.03 Set digital filter buffer
GEN.04 Set use key lock
GEN.05 Set Key Operating Conditions
GEN.06 Set stable range
GEN.07
Set Automatic Zero Tracking
Compensation
GEN.08 Set Weight Back-up
GEN.09 Set Zero range
GEN.10 Set Tare range
GEN.11 Set Init Zero
GEN.12 Set Overload range
GEN.13 Set Hold Type
GEN.14 Set Hold Canceling Conditions
GEN.15 Set average hold time
GEN.16 Set Auto Hold Range
GEN.17 Set Auto Hold Canceling Range
GEN.18 Set the use of Set key
1. General Setting
(1. GEN)
GEN.19 Initializing of set values
COMM.01 Set Device ID
COMM.02 Set COM1 Port
COMM.03 Set COM1 RS-232C Baud Rate
2. Communication
Setting
(2. COMM)
COMM.04 Set COM1 Out Data