23
22
4. PROGRAM Mode
4.1 System Maps
To go to PROGRAM mode, press 10000 by using numeric keys and VOID key.
You can press the key or key to go up and down the Main Menu in PROGRAM mode
ONLY if the UNIT PRICE and TOTAL PRICE displays are BLANK! The same rule is
applied to ACC mode.
If you want to use the key or key to go up and down a menu and the UNIT PRICE and
TOTAL PRICE displays are NOT blank, you must first press the PRT/* key. After the UNIT
PRICE and TOTAL PRICE displays are blank, You can use the key or keys.
4.2 PLU Programming
PLU means Price Look Up. PLUs are used to store the price, name, and other data of items
being sold.
Every PLU has seven data fields: Item Code, Name, Message no. Unit price,
Shelf Life, Tare, Group code.
How to program PLU
To Next Page
Loading...
