CAS LP 1.6 Series - 5.4 Printhead Check (CHESS)

57
56
1) To go to ACCOUNT mode, press 20000 by using numeric keys and VOID key.
2) Press key. The display shows “CLEAr”.
3) Press PRT/* key. The display shows “CLEAr GrAnd”.
4) Press key or keys until the display shows “CLEAr ALL”.
5) Press PRT/* key. The display shows “CLEAr ALL END”.
6) You can use the key or key to select GrAnd, ALLPLU or nonPLU. (To go to CLEAR
menu, press C key. To finish ACCOUNT mode, press the C key again.)
5.3.4 All
5.4 Printhead Check (CHESS)
You can use this function to check the quality of print and if there are any scratches or burn
on the printhead. This function produces a pattern on the label which you can use to determine
the condition of the printhead.
1) To go to ACCOUNT mode, press 20000 by using numeric keys and VOID key.
2) Press
key two times. The display shows “CHESS”.
3) Press PRT/* key. The display shows “CHESS tyPE 1”
4) Enter chess type and press PRT/* key. The scale will issue a label. Compare labels to the
samples above to determine the condition of your printhead.
5) To go to CHESS menu, press C key. To Finish ACCOUNT mode, press the C key again.