What to do if my CAS Scale does not work?
If your CAS Scale isn't working, first check the fuse located to the left of the power switch. If that doesn't solve the issue, try plugging the scale into a different electrical socket.
Why does my CAS Scale count up to 9s and then go blank?
If your CAS Scale counts up to 9s and then goes blank, try the following: * Remove everything from the platter. * Turn the scale OFF and then ON again. Also, ensure the platter is properly installed and nothing is obstructing it from underneath. If the issue persists, contact your CAS Dealer for SPAN calibration.
How to fix if CAS Scale does not accept Tare?
If your CAS Scale does not accept the Tare, ensure that the Tare being entered is within the range of 0.01 to 30.00 Lbs. Also, make sure that the NET lamp is off before attempting to enter a Tare.
What to do if Tare does not clear on my CAS Scale?
If the Tare does not clear on your CAS Scale despite pressing the TARE key, ensure that all items are removed from the platter. If it still doesn’t clear, remove all items from the platter and then turn the scale OFF and ON again.
General warnings and precautions for safe operation and installation of the scale.
Guidelines for scale operation, handling, and battery care.
Environmental, location, leveling, and socket-outlet installation guidelines.
Instructions for assembling the display pole for pole-type scales.
Detailed steps for loading a new label roll into the printer mechanism.
Description and function of the numeric keypad for data entry.
Explanation of the PLU keypad layout and its use for alpha-numerical input.
Overview of the scale's WEIGHT, UNIT PRICE, and TOTAL PRICE displays.
Introduction to the printer mechanism and its parts.
Basic operations in REG mode, including simple weighing and PLU sales.
How to perform simple weighing for PLU and non-PLU sales.
Procedures for using the TARE function for known and unknown tares.
Instructions on using the FOR key for specific pricing scenarios.
Generating multiple identical labels by specifying quantity.
How to enable and use the auto printing function based on weight stabilization.
Navigating the PROGRAM mode main menu and system maps.
Detailed steps for programming PLU data including item code, name, and price.
Assigning PLU numbers to preset keys for quick access.
Programming messages, such as ingredients, for labels.
Setting the header text for non-PLU labels.
Setting shop name and address information for labels.
How to set the scale's date.
How to set the scale's time.
Setting the department number for PLUs.
Configuring label length and format.
Adjusting label position and feed settings.
Setting printing parameters like unit price mode and peel sensor.
Configuring the auto print function's weight sensitivity.
Setting the communication baud rate for data transfer.
Setting currency and weight unit signs.
Configuring currency display, decimal points, and rates.
Adjusting printer sensor settings for optimal print quality.
Procedure for initializing PLU, message, or all scale data.
Navigating the ACCOUNT mode main menu and system maps.
Generating sales reports (Grand Total, PLU, Non-PLU).
Report detailing total sales for all items and non-PLU items.
Report showing sales activity for all PLUs with sales.
Report for a specific PLU's sales activity.
Report showing sales and items sold under non-PLU descriptor.
Function to clear sales data after printing reports.
Clearing total sales data for weight, price, and quantity.
Clearing total sales amount for all PLUs.
Clearing total sales for non-PLU items.
Clearing all individual PLU sale data.
Checking printhead quality by printing test patterns.
List of error codes, their meanings, and troubleshooting steps.
Detailed technical specifications of the scale model.
Troubleshooting guide for common issues encountered with the scale.
Examples of different label formats and their configurations.
To Next Page
General
