CAS LP1000N series - Programming the Date (SET #1)

34
4.7.1 Programming the Date (SET #1)
How to program the date
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key and the display shows “SEt EntEr 0”.
5) Press 1 key and PRT/* key.
6) The display shows “dAtE EntEr”.
7) Now type in the date in DAY/ MONTH/YEAR format. For example, April 19, 2005, would be
entered as follows: 190405 The display shows “SEt”.
8) If you wish to finish PROGRAM mode, press C key.