37
4.7.4 Programming the Label (SET #4)
The label format type controls the label size and barcode format.
1) Label length
How to program the label length
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key and the display shows “SEt EntEr”.
5) Press 4 key and PRT/* key.
6) The display shows “LAbEL EntEr 1”.
7) To program label length, press 1 key. The display shows “LAbEL LEnGtH 40”.
8) Enter label length that you have and presse PRT/* key. (Label length can be from 1 to 99.)
9) The display shows “LAbEL EntEr”. If you want to program label format press 2 key.
If you want to go to SET menu, press C key.
To Next Page
Loading...
