CAS LP1000N series - 4.7.4 Programming the Label (SET #4)

38
2) Label format
How to program the label format
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows“SEt”.
4) Press PRT/* key and the display shows “SEt EntEr”.
5) Press 4 key and PRT/* key.
6) The display shows “LAbEL EntEr 1”.
7) To program label format, press 2 key. The display shows “LAbEL ForMAt 0”.
8) Enter label format number and press PRT/* key.
(Label format number can be from 0 to 30. Refer to Appendix)
9) The display shows “LAbEL EntEr”. If you want to program label mask press 3 key.
If youwant to go to SET menu, press C key.