CAS LP1000N series - 5.2.4 Non-PLU; 5.3 Z Report

64
5.3.1 Grand Total
1) To go to ACCOUNT mode, press 2 by using numeric keys and MODE key.
2) Press v key. The display shows “CLEAr”.
3) Press PRT/* key. The display shows “CLEAr GrAnd”.
4) Press PRT/* key. The display shows “CLEAr GrAnd End”.
5) You can use the v key or u key to select ALL PLU, nonPLU, or ALL.
(To go to CLEAR menu, press the C key. To finish ACCOUNT mode, press the C key again.)
5.3.2 All PLU
1) To go to ACCOUNT mode, press 2 by using numeric keys and MODE key.
2) Press v key. The display shows “CLEAr”.
3) Press PRT/* key. The display shows “CLEAr GrAnd”.
4) Press v key or u keys until the display shows “CLEAr ALLPLU’.
5) Press PRT/* key. The display shows “CLEAr ALLPLU End’.
6) You can use the v key or u key to select nonPLU, ALL, or GrAnd.
(To go to CLEAR menu, press key. To finish ACCOUNT mode, press the C key again.)