CAS LP1000N series - 4.7.8 Baud Rate (SET #9)

48
4.7.9 SIGN (SET #10)
How to enter currency/weight sign settings.
You can modify scale to adjust local law (currency, weight unit, dual currency, etc)
NOTE: reference ASCII code table for signs
1) To go to PROGRAM mode, press 1 by using numeric keys and MODE key.
2) Press v key 5 times.
3) The WEIGHT display shows "SEt".
4) Press PRT/* key and the display shows "SEt EntEr 0".
5) Press 1 key and 0 key and PRT/* key.
1) Changing weight unit sign
1) The display shows "SiGn".
2) Press 1 key and the display shows "WEiGH SiGn C1 0"
3) Type the first letter of weight unit sign. (Reference ASCII CODE)
4) Type the second and third letter of weight unit sign.