CAS LP1000N series - 4.7.1 Programming the Date (SET #1)

35
4.7.2 Programming the Time (SET #2)
How to program the Time
1) To go to PROGRAM mode press 1 by using numeric keys and MODE key.
2) Press v key five times.
3) The WEIGHT display shows “SEt”.
4) Press PRT/* key and the display shows “SEt EntEr”.
5) Press 2 key and PRT/* key. The display shows “tiME EntEr”.
6) Now type in the time in HOURS/MINUTES/SECONDS format. For example, 3:28:00 PM,
would be entered as follows: 152800. The display shows “SEt”.
7) If you wish to finish PROGRAM mode, press C key.