25
4.3 Preset keys Programming
The preset keys are used to quickly access a PLU with only one key press. For example, if
you had preset key programmed to call up PLU number 100, all you need to press is preset⑦
key . When you initialize the scale (it automatically sets up all the preset keys as: preset =⑦①
PLU 1, preset = PLU 2... preset 54 = ② PLU 54.
1) To go to PROGRAM mode press 1 by using numeric keys and MODE key. And then press v key.
2) The display shows “PrSEt”.
3) Press PRT/* key.
To Next Page
Loading...
