63
5.2.4 Non-PLU
Non-PLU Report allows you to see how much and items were sold under the NON-PLU item descriptor.
1) To go to ACCOUNT mode, press 2 by using numeric keys and MODE key.
2) The display shows “Print”.
3) Press PRT/* key. The display shows “Print GrAnd”.
4) Press v key or u keys until the display shows “Print nonPLU”.
5) Press PRT/* key. The scale will issue a Report Label of non-PLU with sales activity.
6) You can use the v key or u key to select Grand total, ALL PLU, or in dividual PLU.
(To go to PRINT menu, press C key. To finish ACCOUNT mode, press the C key again.)
5.3 Z Report
If you want to clear sales data, you have to use this function after you have already printed the
sales data you needed.
To Next Page
Loading...
