CAS LP1000N series - 5.3.1 Grand Total; 5.3.2 All PLU

65
5.3.3 Non- PLU
1) To go to ACCOUNT mode, press 2 by using numeric keys and MODE key.
2) Press v key. The display shows “CLEAr”.
3) Press PRT/* key. The display shows “CLEAr GrAnd”.
4) Press v key or u keys until the display shows “CLEAr nonPLU”.
5) Press PRT/* key. The display shows “CLEAr nonPLU End”.
6) You can use the v key or u key to select ALL, GrAnd, or ALLPLU.
(To go to CLEAR menu, press C key. To finish ACCOUNT mode, press the C key again.)
5.3.4 All
1) To go to ACCOUNT mode, press 2 by using numeric keys and MODE key.
2) Press v key. The display shows “CLEAr”.
3) Press PRT/* key. The display shows “CLEAr GrAnd”.
4) Press v key or u keys until the display shows “CLEAr ALL”.
5) Press PRT/* key. The display shows “CLEAr ALL END”.
6) You can use the v key or u key to select GrAnd, ALLPLU or nonPLU.
(To go to CLEAR menu, press C key. To finish ACCOUNT mode, press the C key again.)