CAS LP1000N series - 4.8 INIT (Initialize PLU and MSG data); Clear Memory

60
5. ACCOUNT Mode
ACC mode is used for accessing sales totals, clearing all sales totals, and printhead check
5.1 System Maps
To go to ACCOUNT MODE, press 2 by using numeric keys and MODE key.
You can press the v key or u key to go up and down the Main Menu in PROGRAM mode ONLY
if the UNIT PRICE and TOTAL PRICE displays are BLANK! The same rule applies in PGM mode.
If you want to use the v key or u key to go up and down a menu and the UNIT PRICE and
TOTAL PRICE displays are NOT blank, you must first press the PRT/* key.
After the UNIT PRICE and TOTAL PRICE displays are blank. You can use the v key or u keys.